Papago - Ethernet temperature module
Temperature sensor with Pt100 / Pt1000 sensor or temperature and hygrometer sensor
Temperature module for different types of sensors with Modbus TCP communication over TCP / IP.
Temperature gauge for Pt100 or Pt1000 sensor (Papago 2PT) or temperature sensor and humidity sensor (Papago 2TH). The module is available for either fixed network connection (Ethernet) or wireless network connection (WIFI).
Communication over Modbus TCP or over TCP / IP on port 502. Configuration of the module is done with the built-in web interface. IP settings and testing of the module can be done with the PiiGAB M-Bus Wizard software.
The built-in web interface shows the measured temperature of the gauges.
Specification for Papago
Web interface for viewing and configuration.
ModbusTCP over TCP / IP on port 502.
Power supply: 11-58VDC. 72mA at 24VDC, 120mA at 15VDC.
The power supply is sold separately.
DIN mounting is sold separately.
Sold either as Ethernet or WIFI.
Specific to Papago 2PT (Pt100 or Pt1000 sensor)
Possibility to use any external Pt100 or Pt1000 sensor.
Measuring range 1: -200°C to + 850°C, with 0.1°C resolution.
Measuring range 2: -200°C to + 400°C, with 0.01°C resolution.
Measurements per second: 1, 2 or 5.
Connection method: 2, 3 or 4 conductors.
Electrical current 100, 250, 500, 750 or 1000μA
Both sensors are connected to screw terminal blocks.
Article number
PA-PGO_2PT_ETH eller PA-PGO_2PT_WIFI.
Downloadable files
Cable
Pt100 sensor
Measuring range: -90 to + 250°C.
Number of leaders: 4 pcs.
Cable length: 3m.
IP: 64.
Cable temperature resistance: -100 ° C to + 250 ° C.
Article number
PA-PT100.
Temperature and humidity sensors
Specifically for Papago 2TH
Each sensor connection can be configured in two different configurations:
- Configuration A: Temperature -40 - 123.8°C, humidity 0-100%.
- Configuration B: Temperature -55 - 125°C.
Both sensors are connected to bayonet connections.
Article number
PA-PGO_2TH_ETH or PA-PGO_2TH_WIFI.
Temperature sensor for Papago 2TH
Measuring range: -55°C to + 125°C
Available lengths: 1m, 3m, 5m, 10m, 15m or 20m.
IP: 68.
Cable diameter: 4.3mm.
Cable temperature resistance: -60°C to + 200°C.
Article number
PA-TEMP_x.
x indicates the length of the sensor.
Temperature and humidity sensor for Papago 2TH
Measure temperature range: -40°C to + 123.8°C with 0.1°C resolution.
Measure humidity range: 0 to 100%.
Calculates dew point.
Available lengths: 1m, 3m, 5m, 10m, 15m or 20m.
IP: 54.
Cable diameter: 4.7mm.
Cable temperature resistance: -60°C to + 200°C.
Article number
PA-THE_x.
x indicates the length of the sensor.
Mounting for DIN rail
For 35mm DIN rail.
NS35
Article number
PA-DIN_02.
Power supply
Voltage: 15VDC.
Current: 0.8A.
Power: 12W.
Cable length: 1.8m.
Article number
PA-PWR_15.
