Configuring M-Bus to Modbus

Quick start Guide to Configure M-Bus to Modbus 

1. Plug all the meters you want to use on the M-bus loop into Mbus Master ports 1-4 on your Gateway. 

2. Search your meters in the web interface using a "Fast Search" in the Startup Config tab 

Your meters should appear in a list under the "Fast Search" button

3. Go to the overview page in Startup Config where the meters should now be visible in the list below.

Add Encryption Keys to the meters if they are Wireless meters

4. Click on "Auto-Create Myconfig files"

The files to be used to read meters are now created

5. Go to MbusHub and the tab "Master port", then select the configuration file for the Master port file as shown below. Save the configuration.

6. Go to Slave Port 1 and select the configuration file as shown below

7. Now you will be able to query against the registry entries described in the CSV file located in the slave ports tab of the web interface