PiiGAB M-Bus Setup Wizard

PiiGAB M-Bus Setup Wizard is a free tool to test, search, and configure M-Bus meters. It is an easy to use software where you can verify your M-Bus plant in an effective way. By using the PiiGAB M-Bus Wizard it is easy to find the PiiGAB gateway on your network, and it also contains a built in Modbus and M-Bus ASCII client.

PiiGAB M-Bus Setup Wizard is an excellent tool to use to find M-Bus gateways such as PiiGAB M-Bus 810 and PiiGAB M-Bus 900S on your network. The PiiGAB M-Bus Setup Wizard can be used together with all types of M-Bus gateways as long as they can handle TCP/IP, UDP/IP or serial communication.

1-eng-hitta-omvandlare 3-eng-anslut

By using the PiiGAB M-Bus Setup Wizard you can communicate and test M-Bus meters with either primary addressing or secondary addressing. It is also possible to change the primary address on the meter or change its baud rate. There are also many more advanced features such as “Application Reset” with sub group or to be able to work with broadcast etc. You can also search M-Bus meters on the M-Bus loop and place them in a table format.

2-eng-hitta-matare 5-eng-soka-matare

The IP address can be set in the PiiGAB M-Bus 810 and in the PiiGAB M-Bus 900 via the gateways MAC-address by using the PiiGAB M-Bus Setup Wizard. The PiiGAB M-Bus 810 is completely configured by using the PiiGAB M-Bus Setup Wizard. You can also set if you want the gateway to be able to communicate with TCP or UDP, which port number, as well as what baud rate to be used. The settings for the PiiGAB M-Bus 900 are normally made in the internal web interface.

In order to be able to test and verify the Modbus slave function in the PiiGAB M-Bus 900 we have built in a complete Modbus test client in the PiiGAB M-Bus Setup Wizard. The client supports both ModbusTCP and ModbusRTU protocol over TCP/IP, UDP/IP or serial.

4-eng-modbus-klient

The PiiGAB M-Bus Setup Wizard also has a built in test client for PiiGAB’s own protocol, M-Bus ASCII. The client is completely general and can be used to develop your own M-Bus ASCII client and to compare and verify readings from the meters via the PiiGAB M-Bus 900.

PiiGAB M-Bus Setup Wizard features

  • Easy to configure the PiiGAB M-Bus 810.
  • Possibilities to administrate the meters remotely over the network.
  • Find PiiGAB gateways on your network.
  • Change IP-address over the network.
  • Ping device.
  • Find M-Bus meters on the M-Bus loop.
  • Change some of the parameters in the M-Bus meter.
  • Read information in hexadecimal from the meters for debugging.
  • Search meters with primary or secondary addressing.